| Card Dispenser
SKU: CAS-CardDispJR
The Card Dispenser allows users (typically students in a university library environment) to purchase new copier usage cards or add value to an existing copier usage card. The user inserts one bill and receives one new card or adds value to one existing card. The Card Dispenser is set in the factory or by a technician to receive only one denomination of bill and produce one denomination of value to a new or existing card.
| $2,950.00
 |
| Card Reader
SKU: CardReader
The Card Reader is designed to offer the convenience of stored-value cards while retaining the familiarity of cash vending for copying/printing
| $1,510.00
|
 | Machine "Not Ready" Status Signal Light
SKU: StatusLight
In noisy environments where operators may be responsible for a number of machines, this yellow strobe light flashes whenever the copier or printer stops running.
| $500.00
|
| Card Acceptor Add-on Module
SKU: CAS-CardAcc-J
The Card Acceptor Add-on Module can be installed on an existing Vend Station that accepts to allow a user to pay for copies with a magnetic card. The Card Acceptor also enables a user to add value to their card for future purchases via the card. It is not a standalone device.
| $975.00
|
| Y Harness and Triple Vend Port
SKU: VendPort
This adaptor is required when two vend devices will be used to control the same copier. The Y Harness plugs into the copier's Foreign Interface and provides two outlets for accommodating vend devices. It is compatible with almost all Xerox approved third party devices and supports multiple pricing.
| $215.00
|
| Remote Counter
SKU: RemoteCounter
This device allows the customer to keep track of copies/prints made and enable/disable the copier/printer from a remote location.
| $575.00
|
| Data Collection Interface
SKU: DataCollection
For customers who want to monitor printer usage, this interface circuit generates a signal each time a print is made. This signal can be used by third party print tracking devices to monitor print volumes. Although this device does not control access to the printer, its function is similar to a copier Foreign Interface.
| $475.00
|
| Convenience Stapler
SKU: ConvStapler
This attractive electric stapler sits on your printer and comes in 50 or 80 page capacities.
| $525.00
|
| Copy / Print Counter
SKU: CopyPrintCount
The Copy / Print Counter counts the number of copies/prints made for charge back and prevents operation unless a cartridge, or 'key', is inserted.
| $750.00
|
| Counter for Client Billing
SKU: ClientBilling
The Counter for Client Billing is used to control and track copier/printer usage, storing usage data in up to 3,000 individual billing accounts.
| $925.00
|
| Vend Station Download Kit
SKU: CAS-JDK-01
This kit enables downloading of data from a Vend Station, Card Reader and/or Card Dispenser to a PC.
| $495.00
|
| Paper Tray Lock
SKU: PaperTrayLock
Paper tray locks prevent access to all paper trays. This locking system is especially helpful for loss prevention in high traffic areas.
| $250.00
|
| Machine Disable with Key
SKU: MachineDisable
The Machine Disable with Key allows you to control copy-making by disabling all copy functions with the turn of a key.
| $475.00
|
| Check Feeder
SKU: CheckFeeder
This accessory enables copying of checks by adapting the document feeder to automatically feed checks ranging from personal size (2¾' x 6') through business size (3½' x 8½') in both simplex and duplex modes. The unit accepts stacks of up to 50 checks and check sizes can be intermixed within a stack. Checks are fed short edge and are copied onto standard size paper.
| $650.00
|
| Heat Exhaust
SKU: HeatExhaust
This thermostatically-controlled blower system mounts to the processor rear cover and exhausts approximately 90% of the processor-generated heat to the area above the office's hung ceiling. Included with the kit are a ceiling flange and cloth duct but the customer
| $650.00
|
| Angled or Movable Control Panel
SKU: AngleControl
This kit either inclines the copier control panel or makes the control panel movable, allowing operators in wheelchairs to view and reach the controls. It does not interfere with normal operation.
| $750.00
|
| Screen Magnifier
SKU: CAS-CC245-11
This add-on magnifying lens allows visually impaired operators to read the User Interface screen more easily. The lens can be easily flipped out of the way when not being used.
| $625.00
|
| Braille Labels
SKU: CAS-BRAI-01
These pressure sensitive labels allow you to add Braille to almost any copier control console. For some copiers, Braille abbreviations fit right onto or next to the number and feature buttons. For others, a large Braille legend is affixed to the document handler to provide a map of the console layout.
| $95.00
|
| DocuCard Paper Feeder
SKU: DocuCardFdr
With this device 200 to 400 DocuCards can be loaded into the paper tray, dramatically increasing productivity when producing DocuCard applications such as membership identification cards.
| $945.00
|
| Vend Station - Coin / Bill
SKU: VendCoinBill
The Vend Station allows users to purchase copies/prints at the Xerox device. It offers excellent features and reliability at a reasonable price. The Vend Station comes with a floor stand to position the Vend Station next to the copier/printer.
| $2,525.00
|
| Vend Station - Coin / Bill / Card
SKU: VendCoinBillCard
The Vend Station allows users to purchase copies/prints at the Xerox device. It offers excellent features and reliability at a reasonable price. The Vend Station comes with a floor stand to position the Vend Station next to the copier.
| $3,675.00
|
| Machine "Not Ready" Status Signal Light with Sound
SKU: StatusLightSound
In noisy environments where operators may be responsible for a number of machines, this yellow strobe light flashes whenever the copier or printer stops running and will emit an audible tone if selected.
| $600.00
|